New Equipment

Vacuum Truck Sales & Service is part of the Vacuum Truck Rentals family of companies and serves as the new equipment sales arm.We partner with industry leaders in the environmental and industrial services equipment industries and beyond to offer many of the most respected product lines in the business.

For more information, please call 888-955-2087 (24/7 Nationwide)

Asphalt Repair

Spaulding Manufacturing

The Auger

The Spaulding RMV Auger Trailer is a trailer that comes built much like the RMV Hot Patcher, but has a built in high power hydraulic auger in the hopper. This rugged machine can empty a full four ton hopper in just ten minutes. This hopper is triple walled, and comes equipped with three burners attached for fast even heat. Also the RMV Auger Trailer comes with hydraulic loading top doors for easy loading of asphalt. Easy loading and unloading, makes for a more productive, and less time consuming job. No matter what size the job, the Spaulding RMV Auger Trailer can auger asphalt out in a fast and effective manner.

The Auger Trailer can come equipped in either Air or Oil Jacketed hoppers. The frame is constructed of 6 x 2 x 5/16" thick steel tubing, the hopper is a triple walled Air Jacketed, and double walled being Oil Jacketed. Both hoppers are fully insulated.

The Auger Trailer can be constructed to meet your needs much like the Roadsaver and RMV. We have many options that we can include with the Auger trailer, such as a mounted tack tank with a spray system that runs off the hydraulics of the machine.

Specs:

Options:

Bulldog 500 Roller

Repairing asphalt is more than the throw & go process, to really make a patch permanent. Spaulding Manufacturing has successfully created, and maintained, a quality crafted Vibratory Roller. The Bulldog 500 is a heavy duty steel constructed vibratory roller made to compact asphalt at 850 psi. With continuous welds and a 3 horse Honda gasoline engine, the Bulldog is lightweight, but powerful. Additionally, it includes a built-in water tank as well as a 3 point adjustable position handle and adjustable tensioner on the belt. Also the Bulldog is LIGHTWEIGHT, at only 105 lbs. The Bulldog's lightweight design makes it easily maneuverable to any size person.

Specs:

Truck Mount

The Spaulding RMV Chassis Mount comes in several combinations, and with several different options. The fuel sources are propane and diesel in Air or Oil Jackets, and have a great heating system to deliver even heat from the front to the rear of the delivery chute. The Spaulding RMV Chassis Mount comes in sizes from 4 to 10 ton size capacities. They can either be equipped with a high power auguring system to auger asphalt out, belt driven, or be built with a hydraulic scissor hoist to feed the asphalt out of the back.

The chassis mount is constructed of heavy duty steel. The hopper is a 3 walled fully insulated area constructed of 10 gauge thick inner walls, 12 gauge middle, and 14 gauge outer. The heat system is designed to keep the burners running while going down the road, and to hold temperatures in the coldest weathers for a significant amount of time.

Many options can be attached to the chassis mount to suite your needs to get the job done safe, and efficiently. It can come with anything from overnight heat, to a spray-able tack system that drives off the PTO on the truck. Click the "More Options" Button to see a list of all the available options.

Specs:

Heavy Duty Steel Construction
Continuous Welds
Automatic Temperature Controller
105,000 BTU Burner for Diesel
Heated Oil-Jacket
Fully Insulated Walls
Auger System / Scissor Hoist / Belt Driven
Hydraulic Top Loading Doors
Easy To Use Controls
Easy Access To Curbside Controls
Meets All DOT Regulation Standards
Heavy Duty Commercial Paint

Options:

Hand Held Torch with Hose
Hoist with Area for Roller or Plate Tamper
Vibratory Roller
Spoils Bin
Fire Extinguisher
Air Compressor
Hydraulic Lift for Roller or Tamper
Cone Holder
Heated 15-30 Gallon Tank Tank with Spray Hose
Beacon Warning Lighting/Strobe/Arrow Stick

Crack Sealer

When it comes time to save your roads by filling cracks, the Spaulding Crack Sealer is a machine that makes this chore fast and efficient. The Spaulding Crack Sealer comes in two sizes, 125 and 225 gallon, and can melt down any road grade rubber sealant for crack sealing on the market. The machine is Oil Jacketed and designed in a way to melt down materials to the materials specification. The Oil Jacketed drum heats up evenly, making for a evenly heated area so there are no "hot spots" in the drum burning properties from the material. This oil-jacketed system is fully insulated, and is designed to keep material at correct temperatures for long periods of time. Material is injected into cracks at around 390 degrees for a perfect injection.

It comes with a heavy duty pump in a heated cabinet, designed to keep material hot while pumping at all times. The plumbing is set to recirculate material during melt down for faster melt down times of material, so you're laying down sealant faster. The drum has a high powered hydraulic agitator for agitation of material. The hose is a fully insulated 110V heated hose designed to keep rubber hot so no plugging occurs. Every area of heating comes with a digital controller for temperature readout, material, oil, and hose.

An array of safety and performance options can be included on a Spaulding Crack Sealer. Overnight heat elements can be directly set into the oil drum for faster start up times, so your crew is getting to work faster. We have a list of options available ranging from safety light kits, propane torches, and on board air compressor systems.

Specs:

Options:

R.M.V.

Specs:

Options:

Melt Kettle

The Spaulding RMV Melting Kettle, made for small maintenance jobs, the melting kettle is know for it's simplicity, ease of operation, and rugged durability. With an Oil Jacketed, fully insulated drum, material is melted down to specification of the materials, so that no properties are burnt out. The heated oil keeps the material hot for long periods of time, so diesel fuel or propane saved.

The melt kettle can come equipped with a hand agitator, or hydraulic agitation system. Temperatures are controlled by a digital temperature controller, so when the drums calls for heat it automatically turns on.

An array of options can be put on a melting kettle. With an extended frame the options of docking for push carts, blowers, and propane torches, can be accommodated. Click on the "More Options" button to see a list of more options.

Specs:

Options:

Tack Trailer

A permanent patch means you don't have to keep re-patching the same job. With a sprayed coat of tack, this will ensure your job is permanently done. Our Tack Tanks are an option for every unit we provide, and if our on-board tack tank isn't enough, well, we also have our 150 or 250 gallon tack trailer for much larger jobs that require tack.

The Spaulding Tack Trailer comes with a hydraulic agitation system, and rear spray bar with eight nozzles. It sprays evenly between the nozzles leaving a perfectly coated area.

The Tack Trailer can be insulated or built without insulation, according to customer specifications. It comes with a diesel burner, and a gasoline Honda engine to power the agitator, and gear reduction pump. Just like the Roadsaver, and Crack Sealer, it comes equipped with a digital temperature controller, for automatic heat detection.

Many options can also be added to the Tack Trailer, some include, hose reels, hand held propane torches, and safety light kits. Click the "More Options" button to see more options that can be equipped.

Specs:

Heavy Duty Steel Construction
Continuous Welds
Automatic Temperature Controller
Surge/Electric Brakes (trailer option)
Commercial Rated Tires
Adjustable 12-Position Hitch
Standard 5 Horse Engine with Gear Reduction
Diesel / Propane Heated
Insulated Walls / Non-Insulated
Large Filling Pressure Release Port
Triple Pressure Release System

Options:

Roadsaver

The Spaulding Roadsaver's design was born to improve upon the original design. The Roadsaver was designed to save time and operational money for the end user. It is an asphalt recycler and hot patch trailer combo ranging in size capacities of 2 to 6 ton. The main advantage to the design of the Roadsaver is only ONE burner is needed to reclaim asphalt, where as others require two burners. The fuel and maintenance savings alone make this unit top in its class compared to the rest.

The Roadsaver is made to last with heavy duty steel construction. The hopper floor is made of 1/4 inch steel. Also it has heated inner hopper ductwork fully heated, for more contact to asphalt for reclaiming. The inner side walls are made of 10 gauge steel, and the outer-skin of 12 gauge. The frame is constructed of 6 x 2 x 5/16" thick tubing.

The Roadsaver can be made to dump asphalt out with the dumping hopper option, which it comes equipped with 2 cylinders to empty the hopper sooner for more production. It can also come with hydraulic top doors, and a hydraulic rear door for easy use of unloading.

There are many other options that you can choose to put on a Roadsaver ranging from strobe light kits, to overnight heat kits that keep the Roadsaver heated all night. Many other options can be made to fit a Roadsaver to your needs. Click the "More Options" button to see a list of more options.

Specs:

Options:

Slip-In

The Slip - In model comes in 2-6 ton hopper holding capacity sizes. Spaulding Mfg., Inc. is determined to meet your needs however you are wanting to dispense asphalt from the hopper. It can come in either standard dumping models, auger, or belt driven.

Much like the Hot Patcher, the Slip-In model is a fully insulated, designed to hold hot temperatures for long periods of time. Curbside digital temperature controls make for easy adjusting of temperatures.

The slip-in by standard is a dump truck insert, however it has the option to be made to auger, or be belt driven. Many other safety and performance options can be assigned to a Slip-In, ranging from light kits, to overnight heating element. Click the "More Options" button to see a list of options.

Specs:

Options:

Easement Machines

EM 105

EASEMENT MACHINE SPECS

Honda 20hp OHV gasoline engine
Selectable 5 or 10 GPM hydraulic operating range for tool circuits
Keyed electric start
Dead-man safety control switch
Integrated hydraulic tool circuit with HTMA quick disconnect couplers
Self-propelled rubber tracks equipped with self-adjusting track tensioner
Turns 360 degrees within its own length, reversible, and climbs 60% grade
Large lifting eye for easy loading/unloading
Integral brake holds unit on incline upon release of controls
Self-cleaning ballast and gravel from track mechanism
Four manually operated adjustable outriggers
Work lights
Adjustable pay in / pay out speed control valve
Locking, pivoting Hose Reel with manual hose wind guide
Hose reel footage counter
1” x 800 FT @2500 PSI Rodder Line included
Max Hose Capacity: 1000ft
Capable to pass through 36” wide gate
Length: 98”
Width: 36”
Height: 72”
Weight: 2420 lbs

Hydro Excavation

VacAll

AllExcavate

High-Productivity Hydro Excavator Excels with High-Pressure Jetting and Vacuuming System

View Specifications

Vacall AllExcavate hydro excavators reflect the superior water pressure and vacuum forces that have established Vacall as an industry leader, efficiently excavating around water lines, sewer lines and other underground utilities.

For optimum operating efficiency and cost control, the AllExcavate hydro excavator design uses a chassis engine to also provide power for vacuum and jetting functions – a design that slashes fuel consumption, eliminates emissions from a second engine and reduces costs and downtime for routine maintenance.

In gas and petroleum industry applications, AllExcavate hydro excavators are proven performers for infrastructure exposure, frac tank cleanout, tie-ins of new lines, drilling rig cleanup and mud removal and exposure of manifolds, valves and risers.

Another popular option on AllExcavate models is a cold weather package. This feature includes heated cabinetry that encloses the boiler, warming the water for hydro excavation when temperatures drop below freezing.

Features and Benefits:

High-pressure water system with rheostat control to vary water volume and capacity output
Heated compartment enclosing water system to protect components against freezing
Water tanks made of high-quality aluminum for extra strength with a lifetime warranty
Large, galvanized steel debris tanks available with lifetime warranty.
AllSmartFlow™ intelligent control system for more precise adjustments in boom movement
Tailgate design featuring a single control to open, close and lock the tailgate
Double-cyclone filtration with simplified design to reduce maintenance, extend performance and increase working life
Rear-mounted boom front-loads debris
Optional cold weather package

GapVax

HV56

HV56 – The GapVax HV56 features wet / dry filtration allowing you to hydro or air excavate. When using it to dry vac, the cyclone filtration system eliminates 90 percent of carry over. With proper service, a GapVax truck can normally operate 1,500 to 2,000 hours before requiring a change of filter bags. Since filtration/blower maintenance is the single greatest expense of a wet/dry vacuum truck, superior filtration immediately lowers operating costs.

HV56 Specifications Sheet

Kaiser Premier

CV Series

CV Series - The CV Series line of Hydrovacs has been developed and perfected over many years. It sets new standards in hydro excavation industry. Every aspect of the hydrovac process was analyzed to ensure that the CV pulls the most dirt in the least amount of time with the safest and most efficient operation possible. All critical components are centralized and housed in an insulated, heated aluminum van body. Operators especially appreciate the functional space located on both sides of the machine.

View Specifications

Industrial Vacuum

VacAll

AllVac

Vacall's AllVac Industrial Vacuum Loader Offers Incredibly Versatile Wet and Dry Vacuum Capability

View Specifications

The Vacall™ AllVac is a high-capacity, truck-mounted industrial vacuum loader that is used worldwide by specialized contractors in the environmental cleaning industry.

For years, cement plants, steel mills, power plants and other heavy industries have relied on the power of the Vacall AllVac for smooth facilities operation . Its wet and dry vacuum capability make the unit an incredibly versatile cleaning machine. Various filtration options, off-loading systems, vacuum pumps and corrosion-resistant components are available to customize your unit for your unique operation.

Features and Benefits:

Universal filter bags maximize volume of airflow
Air cannon auto reset mechanism
True single-mode filtration system with twin-cyclone bulk material pre-filters
Hinged twin-cyclone top door for instant access to all duct work for easy decontamination
Tailgate design featuring a single control to open, close and lock the tailgate
Control panel features a multi-pin connector to join the control panel with circuit breakers to the electrical harness
Exclusive Poured-in-Gasket (PIG) Seals for toughness and long life
Enlarged Dumpchutes to keep material moving freely
One man safety prop

GapVax

HV57

HV57 – The GapVax HV57 Hydro Excavator is a wet/dry vacuum truck and combines the power of an air mover and industrial vacuum loader with superb power and performance.

HV57 Specifications Sheet

Liquid Vacuum

Ledwell D Series

Ledwell’s powerful industrial units deliver relentless, continuous performance and a higher payload capability.

View Specifications

Sewer Cleaning

John Bean

Bulldog Sewer Jet

350/700 gallon with Yanmar engine and Udor pumpbulldog

The Bulldog Sewer Jet is a small, yet powerful machine that encompasses the true legacy of John Bean Jetters: simplicity, durability and functionality. The Bulldog features advanced technology while remaining extremely simple and efficient to operate. It features a rugged Tier 4i 67.7 hp Yanmar engine and an Udor 18 gpm @ 4000 psi run dry pump. Options include wireless remote control capability, jet pulsation, anti-freeze circulation, mini-jet system with quick release mount, tool/accessory storage boxes that provide security and weather protection with easy operator access and many more available options. A hydraulically driven hose reel mounted on a precision milled bearing system provides the user easy access to the line regardless of vehicle location. A 2-½” water fill system with air gap allows for quick hydrant filling while protecting the potable water supply. The Bulldog comes standard with a 2-5/16” ball hitch with an optional pintle hitch available. Electric brakes with an emergency activation system are standard. An electronic safety strobe light provides safety illumination and is standard. With two holding capacities (350 gallon or 700 gallon-2 each of the 350 gallon), the Bulldog meets all your jetting requirements.

STANDARD EQUIPMENT

Sewer Jet 350

350 GALLON WITH JOHN DEERE OR YANMAR ENGINE AND JOHN BEAN PUMP

The Sewer Jet 350 requires only one operator and tows easily behind any standard duty pickup. Hydraulically driven hose reel mounted on a precision milled bearing system provides the user easy access to the line regardless of vehicle location. A 2-½” water fill system with air gap allows for quick hydrant filling while protecting the potable water supply. Optional tool/accessory storage boxes provide security, weather protection and easy operator access. It comes standard with a 2-5/16” ball hitch. Electric brakes with an emergency activation system are standard. An electronic safety strobe light provides safety illumination and is standard.

STANDARD EQUIPMENT

Sewer Jet 600

600 GALLON STAINLESS STEEL TANK WITH JOHN DEERE AND JOHN BEAN PUMP

The Sewer Jet 600 features a stainless steel tank with many of the same features found on the 700 gallon models. Hydraulically driven hose reel mounted on a precision milled bearing system provides the user easy access to the line regardless of vehicle location. A 2-½” water fill system with air gap allows for quick hydrant filling while protecting the potable water supply. Optional tool/accessory storage boxes provide security, weather protection and easy operator access. It comes standard with a 2-5/16” ball hitch. Electric brakes with an emergency activation system are standard. An electronic safety strobe light provides safety illumination and is standard.

Standard Equipment

Capacity is 600 gallon (2268 liters) tank made of stainless steel and carries a 6 month warranty against defects in material and workmanship from date of purchase of unit. The tank feature overhead air-gap fill and a curbside 2-½” brass fire hydrant fitting for easy and safe refill.
Cold weather recirculation system allows water to be re-circulated through main hose and back to tank for below freezing operation
The hose reel capacity is 600’ of optional ¾” or 800’ of ½” high pressure hose and has air pressure clean-out connection
John Deere industrial engine, 80 hp, Power Tech 4045DF270 diesel, 4-cylinder, water-cooled
Pump options are:
- John Bean L0614SC positive displacement, 40 gpm @2000 psi
- John Bean M0610SC positive displacement, 18 gpm @4000 psi
Digital electronic engine control panel presents an hour meter, oil pressure, beacon switch, voltage, ignition switch, throttle control, water pressure gauge, emergency stop, reel speed control and reel in/out control
Auxiliary outlet wash down system with cutoff piped to curbside for spraying/cleaning
Fuel tank holds 16 gallons (56.78 liters)
Trailer features:
- Tandem axle 7000 GVWR (3171 KG) each axle for 14000 GVWR total
- Tires are LT235/85R16 12-ply
- Electric brakes
- 2-5/16” ball hitch
- DOT approved rubber mounted LED lights
- PPG Commercial Performance gray primer and white paint (trailer and reel)
Beacon light mounted over tank
12 volt battery
Hydraulic temp gauge
Heavy duty hose guide
Heavy duty pressure regulator
Engine shroud
Warranty is standard one year parts and labor with exception of engine (2) and tank (6 mo)

Sewer Jet 700

700 GALLON WITH MULTIPLE ENGINE AND PUMPS OPTIONS

sewerjet350-700-1The Sewer Jet 700 requires only one operator and tows easily behind any standard duty pickup. Hydraulically driven hose reel mounted on a precision milled bearing system provides the user easy access to the line regardless of vehicle location. A 2-½” water fill system with air gap allows for quick hydrant filling while protecting the potable water supply. Optional tool/accessory storage boxes provide security, weather protection and easy operator access. It comes standard with a 2-5/16” ball hitch. Electric brakes with an emergency activation system are standard. An electronic safety strobe light provides safety illumination and is standard.

STANDARD EQUIPMENT

VacAll

P-Series

AllJetVac P Series Combination Sewer Cleaners Feature a Positive Displacement Blower System

View Specifications

AllJetVac P Series combination sewer cleaner models use a positive displacement blower system, setting the industry standard for high performance and reliability.

The vacuum and jetting systems are powered by a chassis engine, enabling municipalities and contractors to open clogged sewer lines and remove debris while also reducing fuel consumption and routine engine service cost and downtime. A range of popular unit sizes and power options are available.

Features and Benefits:

Water tanks made of high-quality aluminum for extra strength with a lifetime warranty
AllSmartFlow™ intelligent control system for more precise adjustments in boom movement
Chassis engine powers the vacuum and jetting system, reducing emissions, fuel costs and service requirements
Rugged debris bodies that are built to last.
Optional galvanized bodies have a lifetime warranty
Hose reel rotates into a multitude of positions
Standard 8-foot, 6-inch telescopic boom allows operators to place the vacuum power where it’s needed
Unique multi-stage vacuum filtration system designed to reduce maintenance and extend performance
Tailgate design featuring a single control to open, close and lock the tailgate

R-Series

AllJetVac R Series Combination Sewer Cleaners Feature Hose Reel and Boom System at the Rear

View Specifications

AllJetVac R Series combination sewer cleaners feature a hose reel and boom system located at the rear of the chassis, rather than in the front, accommodating the preference of some contractors and municipalities.

Exceptional performance and reliability are combined with superior operating efficiency, using a chassis engine to also power vacuum and jetting forces, thereby reducing fuel consumption, emissions and service requirements. Choose your unit size, vacuum and jetting power and various options.

Features and Benefits:

Rear-mounted boom front-loads debris so operators can work away from the engine
Hose reel at rear of chassis delivers jetting action in any direction
Rugged debris bodies that are built to last
Optional galvanized steel debris bodies have a lifetime warranty
Water tanks made of high-quality aluminum for extra strength with a lifetime warranty
Unique multi-stage vacuum filtration system designed to reduce maintenance and extend performance
AllSmartFlow™ intelligent control system for more precise adjustments in boom movement
Chassis engine powers the vacuum and jetting system, reducing emissions, fuel costs and service requirements
Tailgate design featuring a single control to open, close and lock the tailgate

AllClean

The Vacall AllClean™ Water Recycling System Handles Sewer Pipe Cleaning All Day With Just One Tank of Water

View Specifications

Vacall AllClean Waste Water Recycling System is a "Green That Works" option for Vacall AllJetVac combination sewer cleaners. It can save time, increase working efficiency and conserve our natural resources.

The AllClean system filters material from water in the debris tank during the jet/vac process. Water moves through a patented filtering system for re-use, allowing crews to continue working through an entire shift without refilling the water tanks.

Located in the front of the debris tank for protection against stones and other vehicles, the AllClean water recycling system also includes a 240-gallon segregated clean water tank section attached to a 10 gpm pump and 50' hose reel for wash down.

View how the Vacall AllClean system works

Features and Benefits:

Automatic filtering process
No loss of performance
No back flushing
No filter change
No interruption of production
No additional wear to high-pressure water pump
No switchover to parallel filter system
Maximum performance with minimal space requirement
Minimal overall maintenance
Low energy consumption
High throughput rate

High Dump

AllJetVac with High Dump Option Efficiently Dumps Debris into Dewatering Containers

Vacall AllJetVac combination sewer cleaners with high dump option enables operators to raise, shift and tilt the debris tank to dump material faster and more efficiently into municipal dewatering containers, avoiding the need for dangerous ramps.

This unique design allows the operator to raise the debris tank up to 76 inches above ground level and shift the tank horizontally 21 inches beyond the rear bumper – a capability that is unmatched in the industry.

The tank movement and dumping is accomplished with a wireless remote control mechanism, providing the operator a clear view of the dumping process, thus avoiding spills.

The vacuum and jetting systems are powered by a single chassis engine, enabling municipalities and contractors to open clogged sewer lines and remove debris while also reducing fuel consumption and routine engine service cost and downtime.

Features and Benefits:

Debris tank can be raised to as much as 76 inches above ground level and 21 inches beyond the rear bumper for dumping into dewatering containers without a ramp
Wireless remote control system allows for clear view of dumping by the operator
Optional slanting splash shield extends from the debris tank to furthur avoid spills
Innovative tailgate design opens, closes and locks easily
Optional flushing system cleans out interior of the debris body
Water tank fabricated from high-quality aluminum
Galvanized debris bodies and water tanks available with lifetime warranty
High Dump is available on P Series models

VacAll Combo

2019 VacAll AJV 812 Combination Sewer Cleaner

Model: AJV 812
Blower: Roots 824 18” HG @ 4000 CFM
Debris Tank Capacity: 8 cubic yards galvanized coating. (“Lifetime”) warranty.
Debris tank splash shield.
Internal tank flush out system.
6” rear door mounted decant valve with 20’ of 6” layflat hose & basket.
Rear door mounted hydraulic driven 4” sludge pump system (710 GPM @ 10’ head). Full size internal decant screens.
3” decant system with valve plumbed to the front bumper.
Transfer case electric shift at hosereel control station.
Controls: ALLSMARTFLOW is an innovative CAN bus control system, enclosed in a protective cabinet.
Fresh water: 1200 gallons, tanks are manufactured of ½” aluminum and carries a (“Lifetime”) warranty.
Low water warning light.
8’ 6” Telescopic boom with 180 deg rotation.
Wireless remote control for boom functions, throttle, vacuum relief valve, water pump speed and E-stop.
Hosereel: Front mounted axial pivoting, planetary gear box driven by hydraulic motor. Supplied with 1”x 600’ @ 2500 PSI “Piranha” sewer hose. Digital footage counter,
Water Pump: 87 GPM @ 2000 PSI, 30- minute run-dry guarantee.
Air purge cold weather system
Ground level grease manifold system
LED Work lights mounted on the rear door and boom.
Front & Rear LED strobe lights.
Rear mounted LED directional arrow stick.
Backup camera system.
Silencer mounted vacuum tube rack.
Toolbox 18”x18”x60” aluminum lockable.

HotJet USA

Xtreme Flow I

HotJet’s Xtreme Flow Drain Line Jetters are engineered for the Rooter and Plumber Professional and built to tackle the toughest blockages. Easy to operate and priced right - the unit will handle small lateral lines with the jumper hose assembly as well as larger lines up to 12”. The unit includes our exclusive engineering features and the Best Warranty in the Industry!

View Specifications

Xtreme Flow II

Page Under Construction!

View Specifications

Xtreme Flow III

Page Under Construction

View Specifications

HotJet I

Hot Jets’ hot water trailer mounted jetters are engineered to instantaneously heat your jetting water from 100° to 196°. We can custom build trailer mounted jetters with up to 18 GPM output of hot water! Extremely effective in removing grease, soils, ice build ups, and blockages in drain lines from 2″ to 24″

View Specifications

HotJet II

HotJet II® Hot Water Trailer Mounted Sewer Jetters are engineered for the Professional Rooter, Plumber and Municipalities and will tackle the toughest blockages! We can custom engineer trailer mounted jetters with up to 20GPM output of hot water! Extremely effective in removing grease, soils, ice build ups, and blockages in drain lines from 2” to 12” – Easy to operate and priced right! Our Hot Jet Units are truly versatile workhorses – and they can be utilized as a dual purpose machine. First – as a powerful drain jetter and Second as a high pressure hot water cleaning unit to clean up properties. The unit includes our Exclusive Engineering Features and the Best Warranty in the Industry!

View Specifications

The Hot Jet II Features…

UPGRADES FOR THIS YEAR:

Full diamond plate premium “powder coat” finish
HD diamond plate fenders
Now a full 10 GPM @ 4,000 PSI Max Output (+/- 5%)
Full adjustable front hitch – 2 5/16″ Ball or D-Ring
2nd HP Reel with 100′ of 3/8″ hose for “sanitary” cleaning
Hose Reel lifted 12″ for easy access

ALWAYS INCLUDES:

Solid Diamond Steel Deck Trailer – Your choice of color
2 – 3,500 lb. Tandem Axles
Full Adjustable Height and style 2 5/16″ ball or pintle style
35 HP Vanguard Engine made by Toyota
Front and Side Tool Boxes – Custom Lockable
Custom Drilled Nozzle Kit
Custom Drilled Warthog Nozzle
Strobe Light
Rear Lighting
Full Solid State Remote Control
Premium Jetter Hose Reel with variable speed and guide arm
300′ Premium Jetter Hose by Goodyear
Lateral Package to clean small drains – 100′
Full Stainless Enclosure
Chemical & Antifreeze Injection Systems
Side and Rear Signage (call for details)

SUPER BENEFITS:

HotJet III

HotJet’s Dual Engine Hot and Cold Water Sewer and Drain Line Jetters are workhorses that are truly the most versatile sewer drain line jetters on the market.

GENERAL SPECIFICATIONS

330 Gallon Water Capacity
Molded HDP Water Tank(s)
Low Water “Shut Off” Feature
2” x 36” Tiger Tail Hose Protector
Adjustable Pressure Relief/Control Valve(s)
Rear LED Lighting
2” Fast Fill Pipe with 100’ Fill Hose

PUMP

Premium Power Line Pumps
Triple Power V-Belt Driven
Dual Safety Adjustable Blow Off Valves and Pump Saver System
Dual Hose Pulsation Controls

MOTOR DESCRIPTION

Engine 2 x 35HP (70HP) Vanguard by Toyota
Battery & Battery Box
14 Gallon Fuel Tank
Rear Throttle Control

TRAILER DESCRIPTION

Full Premium Powder Coat
Rugged, Specially Engineered Trailer to Haul the Equipment and Water Load
Leaf Spring Axles Cushion and Distribute the Weight for Easy Towing
5’x14’ Tandem Axle
Tandem Axle (2 x 5,000 lb)
Dual Axle Brake – DOT Legal in all 50 States

OVERALL DIMENSIONS

HOSE & HOSE REELS

1 – 500′ x 1/2″ Premium Jetter 5,000 PSI Hose
1 – 100′ HD Hose for Power Washing
1 – 100′ Fill Hose
1 – 300’ 3/8” Low Friction Sewer Hose (optional)

EXCLUSIVE ENGINEERING FEATURES

STANDARD JETTER ACCESSORIES

1 – Vacuum Pump Assembly
Adjustable Pressure & Flow with Throttle Control
Pulsation Controls – Hammer Valve
Ball Valve Water Flow Operation

SAFETY FEATURES

10’ Safety Colored Leader Hose
1/2” and 3/8” “Stinger” Pipes Included
Rotary Safety / Beacon Light
Gloves, Eye Protection and Full Safety Operating Manuals included
Over PSI Safety Pop-off Valve

NOZZLES

3 – 3/8” Sewer Nozzles, 1 Ram, 2 Lazer

Sewer Information Software

IBAK

IBAK IKIS

The IKIS sewer information system provides support for network operators and service providers in their oversight of sewerage systems. The software is specialised in sewer operations and provides current information at all times on the state of the sewer network on the basis of sewer inspections, cleaning operations and assessments that have already been completed.

The basic functions of IKIS include data settings for TV inspections, cleaning and renovation tasks, reading, saving and evaluating operational data, photos, films and documents, documentation of work completed and graphic display of the position and condition of the sewerage network.

The sewer database offers easy access to all saved data and comes ready equipped with an easy-to-read sewer network graphic, which shows sewer objects with the aid of background plans and aerial views on the basis of vector and grid files. All the detailed data belonging to a sewer object can be viewed on the graphical user interface with a few simple mouse clicks, and can then be edited where required.

Easily understood statistics and reports document the current status of the individual sewer objects and support the user when evaluating, monitoring and checking the whole sewer network. For analyses affecting multiple sewer networks, IKIS produces a data transfer file for geo-information systems. IKIS can be installed either locally using a single workstation license on a desktop PC or on a multiple-workstation client-server environment. Its network architecture facilitates access from several workstations at a time. Each IKIS workstation can be adjusted to suit its individual operational requirements. Data are managed within a high-performance SQL Server system. Thus IKIS can be used as a video server, for example.

Viewing and managing data is very easy using IKIS. A topic-related network graphic is created on the basis of request filters with very freely configurable settings; for example, sections according to material, year of construction, defect classes or need for renovation. Geo-referenced DXF, TIF or JPG maps can be used for background plans and aerial views.

By clicking on the sewer object you need in the network graphic, you can directly access the relevant inspection photos and films (in MPEG or PANORAMO format), metrics, such as tilt and data entry dialogs for detailed base and inspection data on the sewer. Additional documents, such as PDFs or JPG images, can be easily assigned to the relevant sewer object using drag and drop.

In order to ascertain inspection requirements, a request for the next inspection interval is initiated and the channel objects are displayed in the IKIS network graphical display. Then selected objects (sections, laterals, manholes) are exported along with all data required for inspection (master data, background plans, aerial views, etc.) and passed to the inspector. The data export function informs IKIS when and if a data export has taken place.

If the task has been completed, the newly created inspection data are assigned and archived automatically in IKIS with the help of the Import Wizard. This closed data cycle guarantees that IKIS provides consistently high-quality data.

Coding and reference tables (e.g. ISYBAU XML) are set out precisely by IKIS. Thus master data such as section numbers or materials no longer have to be entered manually for TV inspections. The whole work process is thus faster, and possible sources of error are eliminated at an early stage.

More Information »

IBAK Report Viewer

The IBAK Report Viewer is a powerful tool for displaying all data from a sewer TV inspection.

In addition to reports, statistics, digital images and sewer network maps, it is also possible to view MPEG and PANORAMO films quickly and easily. The Report Viewer is also a licence-free program, with which the entire inspection data can be forwarded onto the customer.

More Information »

IBAK IKAS 32

IBAK IKAS 32 Software is a powerful software for the acquisition of sewer TV inspection data. For the fulfilment of inspection specifications (standard GIS interface) IKAS 32 offers comprehensive input validations.

With the IKAS 32 Reportviewer, inspection data (digital reports, statistics, MPEG and Panoramo films) can be transferred to a preferred media format (DVD, USB-HDD...) and viewed.

The software is available in a wide range of languages. Due to the modular and optionally expandable configuration, IKAS 32 can be quickly and easily aligned with a diverse range of requirements. Even the basic IKAS 32 system is available for a variety of functional environments. First of all for the professional TV inspection vehicles with comprehensive technical equipment, with which the IKAS 32 interacts. Additionally, tailored IKAS 32 variants are available for small systems, such as the IBAK control box (from BK 3.5), the MobiLite and an office version for project pre and post-processing (Operating system prerequisites dependent on the system hardware In the case of some functions described these are options subject to a surcharge). The IKAS 32 can be equipped with a wide range of interface modules – for example ATV-M150, IKIS4, ISYBAU, TVKANDIS4, BE-BEFDSS, NL-SUFRIB2, DK-DANDAS, EN13508 and many more besides. With the IKAS 32 modules the input screens, reference tables, reports (inspection reports), coding systems for the sewer condition, and data imports and exports are all provided. For IKAS 32 operators, maximum data security is granted with the IKAS 32 interface modules tailored to the customer's target system, from the verified data input right through to the standard-conformant data transfer to the customer.

Options – subject to a surcharge – are functional expansions, which may require additional hardware equipment (e. g. measurement function, PANORAMO analysis, ...) Detailed information can be found in the respective brochures, on the relevant brochure pages.

More Information »

IKAS Cleaner

No more paper document processing on the sewer cleaning truck. With IKAS Cleaner software object lists and printed maps are a thing of the past.

A work order consists of just the sewer data and the cadastral plan, which can be acquired electronically from the sewer information system. After the cleaning is finished, the operational data collected during the flushing procedure can be digitally transferred to the sewer data management system. In this way, a paperless flow of data is established between the cleaner and the information system.

IKAS Cleaner is simple to use and can be run on a notebook or touch book in the vehicle. For a flushing and cleaning contract, the sewer master data with geographical coordinates can be read in and displayed on the monitor, together with the graphical cadastral map. The operator selects the predetermined sections, manholes and laterals and adds the operational data such as flushing pressure, water quantity, etc. In this way IKAS Cleaner is completed without any text input. All of the data is acquired using a mouse or touchscreen for checkboxes or to select items from drop-down menus. The time taken for the acquisition is no longer than that required for filling out paper lists. The progress of the work can be seen directly on the sewer network design.

More Information »

IKAS Evolution

IKAS evolution is the new generation of the powerful sewer analysis software, IKAS. Based on a completely newly developed software platform; in the new concept we have implemented our years of know-how in the field of acquisition and analysis of sewer inspection data.

Modern and efficient user guidance is offered to the user. Thanks to intuitive operating procedures, after even a short learning period, the inspector is fully in control of acquisition and analysis of sewer data with all the complex details.

More Information »

WinCan

WinCan Sewer Inspection Software

WinCan was the first sewer inspection software ever developed and remains the most trusted brand in the market. Combine section and observation data with images and diagrams to clearly document pipe condition. WinCan’s basic reporting functionality lets you create a professional, customized deliverable automatically and share it with anyone.

Pipelogix

PipeLogix

PipeLogix offers specialized pipeline inspection software for the collection of CCTV surveys and report generation. The software and it’s modules make the collection of mainline, lateral and manhole survey data easy. Once collected, survey data can be used to create actionable reports or even exported to other programs such as ArcGIS and CityWorks. Software packages are also flexible to meet your needs in both the truck and the office.

Sewer Line Inspection

IBAK

Professional Vehicle Assembly System

The complete system consisting of the 500m winch KW505, T76 and Argus 5 is designed for the inspection of larger pipe diameters.

It offers revolutionary camera technology with the ROTAX panning mechanism, whereby the camera picture always stays right-side up and correctly oriented, even when the camera head is panned, tilted or rotated. The orientation in the pipe is considerably facilitated. This system can be controlled, for example by means of a BE7. Adding an Orion 2.9 with T66 would make sense in order zu cover smaller pipe dimensions.

Technical Data

Product Classification: Complete Systems
Inspection Range: Mains DN 200 and up

Consisting of

Cameras: Argus 5
Camera Tractor: T 76
Cable Drums and Cable Winches: KW 305
Control Units: BS 3.5

Panoramo Vehicle Assembly System

The IBAK PANORAMO system is a unique scanner technology for high efficient sewer pipe inspections. Pipe inspection can be carried out at a substantially higher speed.

Unlike conventional sewer TV systems it uses two high-resolution digital photo cameras with 185° fisheye lenses, which each take images at distances of 5 cm. These are then automatically put together to create a true 3D interior view of the complete sewer pipe. This allows evaluation of the pipe condition in the office at any time. The viewer can move freely in the sewer pipe without any viewing restrictions.

Technical Data

Product Classification: Complete Systems
Inspection Range: Mains DN 200 (DN 150) and up

Consisting of

Camera Systems: Panoramo
Cable Drums and Cable Winches: KW 505
Control Units: BS 7

High-End Vehicle Assembly System

With the Pegasus HD system IBAK is the technological leader in the field of recording and saving in Full HD format.

For the first time it is possible to get an even more brilliant picture in higher resolution from the mains and analyze damages even better. The latest IBAK software IKAS evolution facilitates the procedure. With the help of a 500m cable winch (KW505) long pipe distances can be inspected.

Technical Data

Product Classification: Complete Systems
Inspection Range: Mains DN 200 and up

Consisting of

Camera Tractor: T 76 HD
Cable Drums and Cable Winches: KW 505
Control Units: BS 7

Jetting-CCTV Vehicle Assembly System (System for Laterals)

Built into a combined jetting / inspection vehicle, this system offers the best conditions for the lateral inspection starting from the main pipe.

Due to the modular structure of IBAK components the additional module Lisy 3 can be combined with the T76 tractor to become a satellite inspection unit. For cleaning and inspection in one operation the push rod can be supplemented by a PHOBOS-rinse nozzle. With support of the IKAS evolution software and a camera built-in 3D-sensor the pipe network can be measured in xyz-axis (3D-GeoSense). The accuracy of measurement of the z-axis is also supported by the Hydrostatic Height Determination which can optionally be connected to a jetting TV vehicle.

Technical Data

Product Classification: Complete Systems
Inspection Range: Mains DN 150 and up, laterals DN 100 and up

Consisting of

Cameras: Orion L
Camera Tractor: T 76
Camera Systems: LISY 3
Cable Drums and Cable Winches: KW 505, KW LISY Synchron
Control Units: BS 7

Manhole Inspection Vehicle Assembly System

The PANORAMO technique which is already known from the inspection of main pipes is also used in the inspection of manholes.

The result of the inspection with the PANORAMO SI is a record (consisting of many composite digital images), which forms the basis for the condition evaluation either on-site or in the office. In contrast to conventional methods this system provides the advantage of a seamless inspection of the manhole. This also enables the user to measure objects on the manhole walls.

Technical Data

Product Classification: Complete Systems
Inspection Range: Manholes

Consisting of

Camera Systems: Panoramo SI
Cable Drums and Cable Winches: KW 180 SI
Control Units: BS 7

IBAK Polaris Camera

The IBAK POLARIS pushrod camera was designed to satisfy the demand for a bend capable camera suitable for bends of 90° with a 100% field of view.

The POLARIS has been developed into a pan and tilt camera capable of working in pipes of DN 100 and up.

The camera‘s position at the very front of the device means that no precision guide is visible in the images shown during inspections.

The POLARIS is compatible with IBAK‘s LISY satellite system and with the MiniLite and MobiLite pushrod camera systems.

Two pre-settable focus-point save points make the joint inspection panning process even more convenient. Since frequent refocusing is no longer necessary, the user can reach the targeted position even faster.

IBAK POLARIS – The benefits at a glance
The POLARIS is our new divertable camera for branched pipes from DN100 upwards.

360° panning to inspect joints
100% free field of view
Automatic return to zero function
Programmable approach to viewing positions
Inspection without water-jet driving possible
Provides an alternative to the ORION and ORION L
With panning and tilting function
Panning range +/- 120°
Viewing angle +/- 150°
High-performance Power-LED lighting
Upright picture control in push operation
Integrated location transwithter (can be operated by remote control)
Explosion protection optional
Interior pressure monitoring
Laser measurement

More Specs »

IBAK Nano Camera

The IBAK NANO Camera that was presented for the first in the spring of 2015 is the smallest pan/rotate camera in the IBAK portfolio and is therefore, so to speak, the smaller sister to ORION and POLARIS. It can be operated in pipes with diameters as small as 80 mm upwards.

Any desired viewing direction is reached most rapidly under microprocessor control by the pan/rotate head. The NANO can rotate endlessly around its own axis. The pan function permits a view in all directions, automatic rotation to inspect pipe joints and a view to the rear into laterals. The NANO generates an erect image in axial direction thanks to the UPC function (upright picture control).

With its slim diameter of 47 mm, the camera can be operated with all IBAK push rod systems, camera tractors and LISY systems and has full bend-passing capability. It can be ordered as of now as a single camera head or in combination with a MiniLite push rod system from IBAK and all branch offices and partners.

More Specs »

IBAK Orion Camera

The IBAK ORION is the all-rounder when it comes to the inspection of pipes of DN 100 and up.

Every required viewing range is reached rapidly by the microprocessor controlled pan and tilt head. ORION 2.9 can rotate endlessly around its own axis. By means of the pan function it is possible to view in all directions and even to view "backwards" into the branch when automatically panning to inspect pipe joints. The ORION 2.9 provides in the axial view an upright image thanks to its UPC function (Upright Picture Control). With its small diameter of 60 mm, the camera can be connected to all IBAK camera tractors and has also full bend capability when operated as push camera.

The system is protected by an internal operating pressure of 1 bar and internal pressure monitoring – in case of a pressure drop the inspector receives a warning signal on the LCD display and a warning tone in the control unit. If the customer requires, IBAK can also deliver the ORION models with increased pressure resistance.

The latest camera model, the IBAK ORION 2.9, provides a large angle of aperture, excellent light sensitivity and 3x zoom. Furthermore, its focus depth is remarkable. Due to its enhanced features, the camera is also ideally suited for the inspection of larger pipes. Inspections up to DN 600 can be carried out without the need for additional lights with the ORION 2.9.

Depending on the field of application, the IBAK ORION 2.9 is available with or without explosion protection. Using the integrated location transwithter, the camera’s position can be determined at any time. The in-built laser (2.7) in combination with the IKAS software allows you to make easy diameter and deformation measurements while inspecting the sewer pipe.

The housing made of aircraft aluminium offers resistance to high pressures and a very light weight. These combined qualities allow long travel distances in push operation, and provide maximum camera robustness at the same time. High-strength materials, which are required for the explosion resistance impact test, are used in explosion- safe and non-explosion-safe cameras.

More Specs »

IBAK Orion L Camera

In heavily branched networks, a special version of the IBAK ORION pan and tilt camera is used: the IBAK ORION L.

Its guide unit, the "Kiel rod", can be panned and rotated in all directions and guides the camera smoothly into the target pipe. Its fast direction-changing function and mechanical sturdiness set the ORION L apart from other divertable camera systems for the inspection of house drains.

The ORION 2.8 L has been available since the beginning of 2012 with larger angle of aperture, a 3x digital zoom, and increased light sensitivity. The new version now also has improved image quality.

This camera, which can be deployed in DN 100 and up, has all the identifiable ORION features: full rotatability of the camera head, remote-controlled operation of the viewing direction and all functions of the lens system and internal pressure monitoring. Specially arranged LEDs provide excellent illumination of the inspection area and ensure a superb picture that shows up even the smallest defects. The ORION 2.8 L provides an upright image in the axial view thanks to its UPC function (Upright Picture Control).

The IBAK ORION L can be modularly connected to all IBAK push rods and is particularly effective in combination with the LISY 3 satellite systems. An explosion-safe model is also available. In short, it is userfriendly, robust and low-maintenance – like all IBAK cameras.

More Specs »

IBAK Cerberus Camera

The IBAK CERBERUS is an ideal extension to all IBAK TV systems in order to visually assess the condition of large human-accessible sewers.

The CERBERUS is a hand-held TV camera – with its ergonomically designed holder, lightweight design and automatic shutter and focus functions that can be activated if required, video recording is as easy as pie. The CERBERUS features all desirable camera functions, such as a 10x optical zoom, autofocus and automatic/manual shutter.

The CERBERUS is connected to TV systems via the extension kit. Continuous voice contact is possible between the operator and the inspector, as a headset ensures interference-free communication with the control centre via the camera cable. In this way operator and inspector can work closely while performing special inspection tasks.

Two durable high-power LED headlights and the 10x optical zoom lens are particularly useful for showing up cracks and small defects.

By projecting two laser points on the TV picture at a defined distance from each other, the inspector can easily estimate relative sizes depicted in the picture and thus efficiently evaluate the condition of the sewer.

More Specs »

IBAK Retrus Camera

The IBAK RETRUS is a back-eye camera which can be used on almost all IBAK camera tractors.

The RETRUS allows easier and safer reversing in many situations. Problematic areas detected during forward travel, such as protruding obstructions, damage and displacements are recognised during reversing, so that the operator can react accordingly and prevent damage to the system.

Optimised synchronisation between IBAK winches and IBAK camera tractors guarantees a maximum range at constant speed and a fast automated reversing. However, there are situations where controlling the reverse procedure with a back-eye camera is recommended. For example, if a steerable tractor is in a rectangular conduit, RETRUS makes the reversing procedure for the inspector easier. The danger of a collision between camera tractor and pipe wall is avoided using the back-eye option.

RETRUS also offers invaluable advantages when it comes to reversing with a disconnected winch (with synchronisation switched off). The danger of the camera tractor running over the camera cable is minimised with the back-eye camera.

More Specs »

IBAK T 66 Camera Tractor

The IBAK T 66 is a versatile camera tractor for the inspection of sewers of DN 100 and up.

It can either be used as a portable inspection system or for extending an existing camera tractor system.

A variety of camera connections, wheel sets and a tractor extension kit make it possible to configure the T 66 optimally for different requirements. It is equipped with the modular IBAK camera connection so that all IBAK cameras can be operated with the T 66. Even when used with the two largest zoom cameras, ORPHEUS or ARGUS 5, it achieves good stability and traction.

In narrow spaces the T 66 copes in combination with the camera connection CC1 that can be panned and folded. Because the folding connector for the camera cable can also be moved horizontally and vertically, the camera tractor can be easily inserted into any pipe of DN 100 and up, as well as through compact manholes and maintenance openings.

In larger pipes the use of an ancillary light is recommended. Even larger pipe diameters are easily mastered by the T66 if fitted with the FW 66 tractor extension kit. It is recommended to use the easily installed FW 66 for DN 300 upwards.

The T 66 contains an electronic stabilisation function (ATC = Automatic Tilt Compensation). This function provides active overturn protection, allowing the tractor to drive safely in the pipe invert. The T 66's modular design and the use of only a single tool for fitting individual components result in short set-up times for the pipe adaptations, resulting in more efficient working.

Top performance using a portable system IBAK's ORION pan and tilt camera, the KT 180/ KW 104 / KW 204 cable drum, the BP 4 or control box and the T 66 camera tractor, will provide you with a compact, high-performance, portable inspection system.

An extension to the existing tractor system The power spectrum of the existing IBAK tractor range has been enhanced by the addition of the T 66 camera tractor, which makes pipe inspections of DN 100 and up possible.

More Specs »

IBAK T 76 Camera Tractor

The IBAK T 76 is a robust and steerable camera tractor for the inspection of sewers of DN 150 and up.

In combination with a lowering device, the vertically and horizontally bendable folding connector for the camera cable and the bendable camera connection assure easy handling. The camera tractor can be easily and conveniently introduced into any pipe of DN 150 and up – with the corresponding accessories also through manholes with diameters of DN 300 and DN 400 and up.

The wheel sets are supplied with the camera tractor and the optional integrated electronic height adjusting device; this allows convenient inspections with a centred camera in pipe diameters up to DN 700 For pipes with larger diameters, suitable accessories are available.

The T 76 has an electronic stabilising function which automatically guides the camera tractor back into the pipe invert if its position deviates. All components and sub-assemblies are designed for maximum robustness and reliability. The T 76 as well as the T 86 are designed as a modular system consisting of the tractor base, the camera base, a positioning unit and wheels. Both tractors can be easily assembled and reconfigured as necessary by the user with just a few manual actions required.

Customers with an IBAK KRA 75 or 85 can use their existing wheels on the T 76 and the T 86 too.

More Specs »

IBAK T 76 HD Camera Tractor

The IBAK T 76 HD is a robust and steerable camera tractor for the inspection of sewers of DN 150 and up.

Customers with an IBAK KRA 75 or 85 can use their existing wheels on the T 76 and the T 86 too.

More Specs »

IBAK T 86 Camera Tractor

The IBAK T 86 is an efficient camera tractor for inspecting pipes of DN 200 and up.

Its powerful drive enables it to perform pipe inspections proficiently also over long distances.

The electrical positioning unit (available as an option) positions the camera at the optimal height in the sewer pipe. Together with the lowering device, the folding connector that bends horizontally/vertically for the camera cable and the camera connection ensure simple and safe introduction of the camera tractor into the pipe.

After inspection, the tractor's fast reverse speed makes it possible to finish the work procedures quickly.

All components and sub-assemblies are designed for maximum robustness and reliability.

Both the T 76 (see previous pages) and the T 86 are designed to form part of a modular system consisting of the tractor base, the camera base, a height adjusting device and wheels. Both tractors can easily be assembled and reconfigured as required by the user with just a few manual actions.

Customers with an IBAK KRA 75 or 85 can use their existing wheels on the T 76 and the T 86 too.

More Specs »

IBAK T 86 HD Camera Tractor

The IBAK T 86 HD is an efficient camera tractor for inspecting pipes of DN 200 and up.

Its powerful drive enables it to perform pipe inspections proficiently also over long distances.

After inspection, the tractor's fast reverse speed makes it possible to finish the work procedures quickly.

All components and sub-assemblies are designed for maximum robustness and reliability.

Customers with an IBAK KRA 75 or 85 can use their existing wheels on the T 76 and the T 86 too.

More Specs »

IBAK LISY3 Camera System

The IBAK LISY3 module turns the IBAK camera tractors T 76 and T 86 into a lateral inspection system.

It can be operated in mainline sewers of DN 150 diameter upwards. An articulated joint allows easy entry into sewers, even where there is a bend in the sewer. With the plug-in height adjustable elements contained in the assembly kit, the camera tractor can be easily adapted to the pipe diameter with LISY 3.

Using LISY 3, laterals of DN 100 and up can be inspected from mainline sewers. The LISYCam 3 attachable control camera, which is used to continuously monitor the position of the equipment and which assists with inserting and forward feeding of the inspection camera, assures a seamless work flow.

For cleaning and inspection in a single operation, a PHOBOS series flushing nozzle can be attached to the push rod of the KW LISY synchronous winch or the KT 220.

The LISY 3, in combination with the T 76 / T 86 camera tractor, is a robust and durable inspection system which meets individual requirements and not only its high advancing speed but also its easy handling make it very appealing.

More Specs »

IBAK PANORAMO SI Camera System

With the IBAK-PANORAMO SI, the user has the distinctive advantages of PANORAMO technology also at their disposal for manhole inspection.

The result is the ability to visually assess the condition of manholes quickly and completely.

The 3D scanner uses two high-resolution digital cameras with specially designed distortion-free wide-angle lenses, which optically scan the entire interior of the manhole in a few seconds in one single vertical run. The digitally transwithted image data is immediately at the operator‘s disposal as a live picture. The condition of the manhole is then evaluated either in the office or directly on site.

Unlike a video from a conventional pan and tilt camera, which only shows the section of view saved at the time of recording, the IBAK PANORAMO SI viewer software provides a seamless inspection of the manhole. The inspector can stop at any position in the manhole, pan 360°, zoom and save snapshots.

An unfolded view of the manhole can be generated at the same time. This gives a rapid overview of the of the structure's condition and enables the user to measure objects on the manhole walls.

For further assessment of the data IBAK's IKAS sewer analysis software, the PANORAMO SI option manhole inspection, is available. With this software PANORAMO SI films are analysed easily and efficiently.

The results are inspection reports and inspection data to suit all commonly used data interfaces. The licence-free IBAK viewer software provides the customer with a complete overview.

The IBAK PANORAMO SI manhole inspection camera can be operated as an extension to IBAK PANORAMO inspection systems with a BS 5/BS 7 control unit, or as an installation kit for a vehicle (e.g. VW T5)

More Specs »

IBAK KW 305

The IBAK KW 305, KW 310 and KW 505 are fully automatic, motordriven cable winches holding up to 600 m (KW 505 with BS 5) of camera cable.

All three are designed for the operation with IBAK camera tractors and cameras. Also IBAK LISY on T76 / T86 in combination with the LISY winches is operated with KW 305 / 310 / 505.

The IBAK camera systems PANORAMO, PANORAMO 150 and PANORAMO SI can be operated with KW 310 and KW 505 (with FO cable).

The integrated traction regulating device synchronises camera tractor and cable winch operation: the cable is coiled onto and uncoiled from the winch in accordance with the speed of the camera tractor. This intelligent regulating system prevents the camera tractor from running over the camera cable and at the same time ensures that the camera tractor reverses at a consistent speed.

The swivel boom enables exact positioning of the camera system over the manhole. The relevant camera system can then be lowered safely and accurately into the manhole with the hoist, whilst the integrated workplace light provides optimum illumination of the manhole opening.

The automatic cable guide ensures even winding of the camera cable onto the winch.

In addition, the user can take advantage of the autostop function. This stops the camera tractor automatically at pre-defined positions when it is moving in reverse direction. This is particularly useful when it is approaching the entry manhole – a further example of the great user-friendliness of IBAK inspection systems.

The picture is transwithted safely and without loss by the KW 505 and KW 305 via optical fibre. The KW 505 can also be equipped with a thinner, lighter fibre optic cable to allow the cable winch to accommodate up to 600 metres and be operated using the BS 5.

More Specs »

IBAK KW 310

The IBAK KW 305, KW 310 and KW 505 are fully automatic, motordriven cable winches holding up to 600 m (KW 505 with BS 5) of camera cable.

All three are designed for the operation with IBAK camera tractors and cameras. Also IBAK LISY on T76 / T86 in combination with the LISY winches is operated with KW 305 / 310 / 505.

The IBAK camera systems PANORAMO, PANORAMO 150 and PANORAMO SI can be operated with KW 310 and KW 505 (with FO cable).

The automatic cable guide ensures even winding of the camera cable onto the winch.

More Specs »

IBAK KW 505

The IBAK KW 305, KW 310 and KW 505 are fully automatic, motordriven cable winches holding up to 600 m (KW 505 with BS 5) of camera cable.

All three are designed for the operation with IBAK camera tractors and cameras. Also IBAK LISY on T76 / T86 in combination with the LISY winches is operated with KW 305 / 310 / 505.

The IBAK camera systems PANORAMO, PANORAMO 150 and PANORAMO SI can be operated with KW 310 and KW 505 (with FO cable).

The automatic cable guide ensures even winding of the camera cable onto the winch.

More Specs »

IBAK KW LISY Synchron

The IBAK LISY winches supply the cameras connected to the IBAK LISY inspection system.

The LISY winches are available in two different versions: the IBAK KW LISY Synchron motor-driven cable winch and the IBAK KT 220 manual cable drum.

The cable winch KW LISY Synchron can hold up to 180 m of camera cable; of which 40 m are for the so-called "Magic Push Rod". This is a guide hose containing both the camera cable and the push rod. The semi-rigid propulsion tube provides excellent bend capability and powerful propulsion and achieves long push lengths during lateral service inspections.

The KW LISY Synchron is motor-driven; winding on and off the cable is automatically synchronised via an electronic regulating device to the speed of the cable winch in operation (e.g. KW 305 or 505) and the LISY 3 camera tractor that is connected to it. This ensures particularly convenient and efficient working procedures.

The IBAK KT 220 cable drum is the manual version for KW LISY operation. It holds 130 m of camera cable, including 40 m of "Magic Push Rod" (guide tube with camera cable and push rod). The KT 220 is the version for installation in vehicles with liwithed capacity and payload.

More Specs »

IBAK MiniLite Compact Push System

The IBAK MiniLite is a compact push camera system for inspecting household and property drainage systems.

It combines extreme durability with easy handling and can be used safely after only a short training period.

The MiniLite can be deployed together with the HYDRUS and a 30 metre Magic Push Rod from DN 50 upwards. In pipes of this size its ability to negotiate bends of 90° is guaranteed.

All other push cameras that can be attached to a Magic Push Rod (up to 40 m in length) or a Perfect Push Rod (up to 80 m) can be deployed in larger pipe diameters.

The 10.4" MiniLite display provides excellent picture quality for all camera variants. Our location transwithter (fitted on POLARIS, ORION and ORION L and JUNO) can be operated easily from the MiniLite control console.

Where deployed with the ORION or POLARIS, the system can make laser measurements at the push of a button (optional). Text can be input and image or video files can be saved to an SD card simply and easily. The foil keyboard is particularly large, allowing the user to enter data even with gloves on. The whole system is fully splash-proof and very easy to clean.

More Specs »

IBAK BS 3.5 Control Unit

The IBAK BS 3.5 is an operating system for IBAK inspection equipment for fixed installation in an inspection vehicle.

Both these central control and operating units consist of an ergonomically designed control console (BP 3.5), a 19" rack mount and a keyboard. All current IBAK tractors, winches and cameras can be operated with either system, the connected components are automatically identified by the system. This automatic identification turns the touch screen into a particularly user-friendly device that is instantly usable.

The tractor and the camera are operated in a user-friendly manner with both joysticks. The touch-screen also offers the user a wide variety of other possibilities, such as an information menu where all assembled components and components identified by the system are displayed on a colour display. In addition, various features can be controlled, such as light intensity, different functions of the camera and the tractor as well as further system-relevant options.

Damage descriptions, symbols or comments entered via the keyboard can be overlaid with the integrated data display generator into the video image.

In addition, it is also possible to connect video recording devices. Spoken comments can be recorded using the integrated microphone in the control console; the audio output enables saving of these voice-overs synchronously to the inspection video.

More Specs »

IBAK BS 7 Control Unit

The IBAK BS 7 is an operating system for IBAK inspection equipment for fixed installation in an inspection vehicle.

Damage descriptions, symbols or comments entered via the keyboard can be overlaid with the integrated data display generator into the video image.

More Specs »

IBAK BS 5 Control Unit

The IBAK BS 5 is the central control and operating unit for permanently installed IBAK inspection systems.

All current IBAK cameras and tractors can be operated using it. The camera tractor and the respective camera are controlled via the ergonomically-shaped console, with two joysticks, enclosing the PC keyboard.

With its high-tech microprocessor control, the intelligent IBAK BS 5 control system identifies the system components connected and status information, such as the internal pressure of camera and tractor, supply voltage, lighting intensity as well as the height of the electronic height adjustment as a percentage, is displayed on the graphics LCD for the user.

Seven of the 16 control keys have pre-defined functions by default, and nine further keys are automatically assigned with functions by the system depending on the system configuration.

The IBAK BS 5 also has an integrated autostop function, which, in combination with cable winches KW 310 and 505, causes the tractor to stop at pre-defined points when driving in the reverse direction. This makes it much easier, for example, to approach the entry manhole correctly.

The polished, practical and energy-efficient design of the IBAK BS 5 guarantees efficient operation of IBAK inspection systems from every perspective.

More Specs »

IBAK PHOBOS 1

IBAK PHOBOS flushing nozzles enhance the IBAK range of products by providing the ability to inspect and clean house drains and house sewers in one single operation.

One efficient, tried-and-tested solution would be to combine the IBAK ORION L with one of the three PHOBOS flushing nozzles, which are fed by the high-pressure flushing system. These are operated on either the LISY 3 combined with an IBAK-TV and flushing vehicle. Alternatively, you can use IBAK pushrod systems connected to the flushing vehicle. The IBAK flushing nozzles can be easily secured to the camera push rod and allow inspection and cleaning in a single operation.

You can achieve a high cleaning performance and good satellite drive for the TV camera with all PHOBOS models. This is thanks to the special design of the interior of the nozzle, in particular on the PHOBOS 2 and 4, which helps to reduce flow turbulence to a minimum, thus reducing any loss in performance within the nozzle.

When combined with the flexible IBAK ORION L camera, this even allows heavily branched or very long pipes to be cleaned and inspected with ease.

The IBAK PHOBOS 4 is switchable, and depending on the requirements, the direction of the water flow can be oriented either forwards or backwards.

With the water flow oriented forwards, accumulated material can be washed away on inspection; if the flow is oriented backwards it acts as a "reverse gear", especially in a branched lateral network with branches, as the water pressure aids the camera in moving around curves when travelling backwards.

The IBAK flushing vehicle with integrated high-pressure flushing technology and IBAK flushing nozzles perwiths the inspector to work highly efficiently, as: flushing and TV inspection can be performed in a single operation and – importantly – without leaving the mainline sewer, which means that you do not need to rely on inspection openings or transfer manholes.

More Specs »

IBAK PHOBOS 2

IBAK PHOBOS flushing nozzles enhance the IBAK range of products by providing the ability to inspect and clean house drains and house sewers in one single operation.

When combined with the flexible IBAK ORION L camera, this even allows heavily branched or very long pipes to be cleaned and inspected with ease.

The IBAK PHOBOS 4 is switchable, and depending on the requirements, the direction of the water flow can be oriented either forwards or backwards.

More Specs »

IBAK PHOBOS 4

IBAK PHOBOS cleaning nozzles used with a pushing system offer the possibility of reaching a maximum range of action and propulsive force.

In addition, a cleaning quality is achieved which makes it possible (depending on the degree of soiling) to inspect and clean underground water pipes and connections in a single operation. For this, the already renowned ORION L camera is the effective solution combined with one of the four cleaning nozzles supplied by a high pressure cleaning device. The cleaning nozzles are used with an IBAK TV inspection and cleaning vehicle. Another option is to use IBAK equipment that can be used for pushing connected to a vehicle equipped for cleaning. The IBAK cleaning nozzles can be attached to the camera push rod in just a few steps. With each PHOBOS model, a very strong propulsion for the inspection camera is obtained as well as a good cleaning performance.

The PHOBOS 2 and PHOBOS 4 models have been designed to meet the needs for propulsion and maximum range. In combination with the ORION L directional camera, it is even possible to easily clean and inspect branch networks and long distances. The PHOBOS 4 has two activatable water jets directed towards the front. The two jets can soften the residue in front of the camera and therefore facilitate passage. In addition, during the passage, the accumulated materials are thus carried out of the pipe. The water jet also allows easy removal when operating the nozzle. The strong point of PHOBOS 1 is the cleaning of pipes. Thanks to the 5 orifices of the nozzle and a flat jet angle of 30 °, the best cleaning results are achieved with it.

The PHOBOS 3D cleaning nozzle occupies an exceptional place: unlike other cleaning nozzles, it forms a unit with the camera cable. It is connected and is used directly on the cleaning hose. Combined with the ORION camera, it facilitates the advance when going through difficult bends. Thanks to its special construction, it guarantees exact position and jerk-free movement, allowing the camera to precisely follow the path of the pipe. The PHOBOS 3D is used for the measurement of the plotting in 3 dimensions and the measurement of the hydrostatic height. IBAK cleaning vehicles with their integrated high pressure cleaning technology and IBAK nozzles allow maximum work efficiency for the inspector: cleaning and TV inspection take place in one operation,

More Specs »

IBAK ILP (Laser Profiler)

The IBAK ILP (Laser Profiler) reliably locates and measures sewer pipe deformations.

The deformation measurement is carried out by a laser diode mounted on a pipe camera (TRITON, JUNO, ORION, ORPHEUS, ARGUS 5, PANORAMO). Depending on pipe diameter and camera type, the laser extension and support may vary.

The laser profiler mode of operation is based on a laser ring, which is projected onto the pipe wall and subsequently recorded by the connected camera. The software calculates the data received and creates a 3D model of the pipe geometry. It is also possible to generate two-dimensional illustrations and graphics.

With these graphic illustrations all requisite information regarding the diameter, ovality, deformation, corrosion, percentage of full capacity, minimum/maximum diameter as well as horizontal and vertical diameter (X and Y) in mm can be deduced.

The data collected by the whole recording can be viewed and shared using our licence-free viewer at any time.

This system provides for a high level of accuracy (tolerance ±0.5% in relation to pipe diameter). The IBAK Laser Profiler is an international measuring instrument recognised by the WRC (Water Research Council) in England and the Department of Transportation USA.

More Specs »

ARGO 2

The IBAK ARGO 2 camera raft was specially developed for pipes of larger dimensions that are partially filled with water.

The floating body is secured by means of a pull rope. That makes it possible to inspect either with or against the current in the pipeline.

You can mount any of IBAK‘s cameras using the appropriate adapters. It is also possible to achieve the correct centre of gravity by placing a variety of counterweights.

More Specs »

IBAK Vehicle Outfitting

IBAK's core business activity is fitting out inspection vehicles. Whether plug and play solutions in the form of ready-made mounting elements or fully equipped vehicles: everything is designed for day to day operation in harsh environments.

View Specifications

Individual detailed solutions of first class quality from IBAK form the basis for a long service life and cost-effective operation  Lightweight, high-quality outfitting materials provide ample space for the required inspection components; insulation of the van body ensures balanced temperatures in the vehicle.

The work areas in both the operator's section and the equipment section are of functional design in line with ergonomic requirements and ensure comfortable and at the same time smooth working procedures.

The power supply to the TV system is emission-free thanks to the use of state of the art battery systems.  

An extensive range of optional extras enable us to meet individual requirements.

IBAK Mobile/Installed system KW 150

The system is available either as a mobile or installed system.

The AlliGator, MiniGator and all IBAK reconstruction components are all operated from it.

The cable winch is available in two sizes for hybrid cable lengths of 100 or 150 m. Only a single cable is required to operate electric cutting and grinding robots. This cable has a diameter of 28 mm and is lead by a cross spindle.

The cable winch module is supplied by an electrical drive; it is equipped with a metre counter, speed control and an electrical switch box. Two integrated water pumps and water tanks cool the cutting motor and clean the camera.

IBAK Capstan winch

The capstan winch is designed for pulling in linings and lighting chains for repair.

The removable wheels and a folding handle allow the unit to be transported easily by a single person, as well as perwithting it to be used even in hard to access locations. This feature makes it unique on the market.

Its lightweight aluminium frame makes the 82-kilogram capstan winch easy to handle.

It is positioned directly over the manhole for pulling in lining or chains of lighting.

The winch is driven by a 4-stroke petrol engine, giving it a maximum pulling power of 12 kN (1.2 T).

IBAK MicroGator

Introducing the most advanced cutting and grinding robot on the market today! The NEW MicroGATOR® 2.0 is the powerful, single-point electric reinstatement cutter and grinder manufactured to the exacting quality standards of IBAK. With longer cable lengths, powerful and quiet cutting motors, and drive units designed to withstand the toughest jobs, these cutters have already reset the industry’s expectations.

High powered cutting motors are deployed from the durable cutter chassis. The main body expands to center the tool in the pipeline and the on-board monitoring camera ensures that you can operate the unit with ease. You can even make 360° cuts!

IBAK MicroLite Pushrod System

The new MicroLite Pushrod System delivers a high-quality, budget friendly push system for contractors and plumbers. The completely new auto-uprighting camera, Axial, is usable in 2″ to 4″ diameter pipelines. This system is equipped with the new BP 1 Controller which includes Windows 10 & recording software, and the entire system is powered by rechargeable batteries.

IBAK AxialCam 2.0 Camera

The Axialcam 2.0 includes LED lighting, electronic upright picture control, auto focus, and the ability to inspect 3″ pipelines and up. This camera is designed specifically for our pushrod systems. For smaller diameter inspections see the Axialcam 1.0 included with the MicroLite package.

IBAK Orpheus 2.0 Camera

The ORPHEUS 2.0 mainline inspection camera that has been redesigned to move beyond the specifications of its predecessor. With more powerful zoom, higher picture quality, greater lighting, and an increased deployment range, this newly designed camera can easily take on any pipeline 6″ or larger! The ORPHEUS 2.0 is the core to any mainline inspection system.

IBAK Orpheus 2.0 HD Camera

Designed from the ground up to be 100% High Definition, the ORPHEUS HD provides the clearest, most detailed images of any camera available for mainline inspection. With 10x optical zoom, 12x digital zoom, and a Full HD CMOS imager, this camera is capable of filming 30 fps at 1920×1080. You will be able to leverage the quality of your service like never before with the ORPHEUS HD.

IBAK PANORAMO 4K Camera System

IBAK designed PANORAMO® from the ground up to address the weaknesses of traditional video technology. The PANORAMO® method changes your current process into data collection in the field and data analysis back in the office. The technology enables your employees to work to their potential and avoid costly mistakes caused by inattention or stress. At the core of the PANORAMO^® system are the wide angle (185º) twin digital cameras. These cameras are installed on the front and rear of the system and capture still images as they move through the pipeline. Extremely powerful Xenon strobes illuminate up to 48” pipelines, and the still pictures captured by the cameras produce high-resolution digital images that do not suffer from motion blur even at the highest inspection speeds. The PANORAMO® system has very few moving parts, allowing for easier maintenance than that of traditional pan & tilt cameras.

Over the past few years, the PANORAMO® product line has been further improved on the basis of its well proven technology. The result is an even much more brilliant picture with 4K resolution. The abbreviation 4K stands for 4000 and means the approximate number of horizontal picture elements (4096 × 2160 pixels). So this means that the resolution is four times greater than full HD. To achieve such brilliance and to allow this high resolution to be displayed on the monitor and stored, the transmission path has been revolutionized. For the first time in the history of IBAK, a Gigabit Ethernet Standard is being used for the transmission of images and other data.

IBAK has very positive experience in the implementation of fiber-optic technology. With the Gigabit Ethernet Standard, a data transmission rate of up to a billion bits (one gigabit) per second is possible. In the new PANORAMO® generation, as with most other IBAK cameras, there will be the option of integrating a 3D sensor for pipe run measurement.

IBAK PANORAMO 150 4K Camera System

As cities clamored for PANORAMO® data, IBAK recognized they could design a pipeline scanner that was easier to operate. The PANORAMO® 150 is that system! Capable of inspecting over 90% of the pipelines that are found in sanitary sewer systems, the PANORAMO® 150 is perfect for contractors and cities who want increased productivity and speed. Although the 150 is smaller, it is more agile than its larger brother. Not to mention, it includes zero-radius steering and Automatic Tilt Compensation (ATC) standard!

IBAK SI 4K Camera System

No other system captures the quality or quantity of data that PANORAMO SI 4K does. Other 3D optical manhole scanners are slow, clumsy, and unsafe. With its unique ability to capture every inch of the manhole, you will never miss an observation. Keep your employees safe, increase the productivity and accuracy of your crews and provide clear data that helps system owners make informed decisions. The PANORAMO® SI can be used as an add-on to your existing PANORAMO® system or can be used as a portable stand-alone unit. Completely self-contained system on a 4′ x 4′ skid that can easily be mounted in a cargo van, pick-up bed, or an off road ATV. The electronics are mounted in a shock-resistant military style case with a flip-up monitor and keyboard. The compatible cable reel is a fiber-optic KW 505 with 300′ of high strength cable.

IBAK KW 206

The KW 206 reel was designed to be compact, powerful and easy to maintain. This design is based on decades of manufacturing expertise and real world project requirements. This drum includes an automatic level wind, powerful retrieval motor, rear tractor/winch controls and an emergency stop switch.

IBAK KW 306

The KW 306 is the sibling of the KW 206 compact cable reel. Sharing the same core features, the KW 306 is larger to accommodate up to 1000′ linear feet of cable. Whether mounted in a vehicle, ATV, or trailer, this drum is a compact, economical option for most mainline inspections that are compatible with the BP1, BP2, and BP100.

IBAK BP 1 Controller

The BP1 control unit is equipped with a 10-inch touchscreen display and is optimally suited to control the MicroLite Push System. Pan and tilt cameras can be controlled by the BP1.

IBAK BP 2 Controller

The BP2 control unit is equipped with a 10-inch touchscreen display and one joystick for control of camera and tractor functions. The BP2 is optimally suited to control the compact pushrod system, MiniLite 2, but can also be used with the MicroLite system.

IBAK BP 100 Controller

The BP100 control unit is equipped with a 10-inch touchscreen display and two joysticks for control of camera and tractor functions. The BP100 is optimally suited for controlling the compact system, MainLite, but can also be used with the MicroLite and MiniLite 2.

On-Screen distance counter provides easier data collection
Better picture quality with 10.4" LCD color monitor
Easily playback from and record to 8GB USB memory stick
Integrated text-writer offers complete recording of job details
6" to 18" skids allows several pipe size inspection options
Saving countless hours with internal battery in the system
Work faster and easier with one-touch remote recording capabilities
Quick troubleshooting your camera head with the camera test port
1.3" Modular Camera will inspect more with one camera

Street Sweeper

MadVac

LP61 - Portable Vacuum Litter Collector and Spill Clean-Up System

Madvac® LP61 Portable Vacuum Litter Collector and Spill Clean-Up System

View Specifications

Compact, lightweight and ease of use
Fork lift and front loader ready
Easily transported using; a standard pick-up with 6-ft box, rough terrain vehicle or tow behind trailer conversion with standard hitch
Spill clean-up option with absorben

LN50 with Assisted Arm

Madvac® LN50 Vacuum Litter Collector with Assisted Arm

View Specifications

Simple, low cost operation and maintenance
High operator seating for safety and visibility
Assisted hydraulic arm controlled via joystick (up/down)
Wander hose collects litter up to 15 feet away
48” Wide vacuum head option
CNG engine option available

LR100 with Robotic Arm

Madvac® LR100 Vacuum Litter Collector with Robotic Arm

View Specifications

High profile approach to cost-effective vacuuming
Lightweight, compact and easy to operate
Intuitive arm control via 6-position joystick for effortless use
High dumping SST hopper – 1 cubic yard capacity
48” Wide vacuum head option
Ergonomic cab with optional air conditioning

LS100

Keep your city clean with the LS100:

View Specifications

The LS100 is a compact sweeper designed to handle every kind of paving surface in every corner of the city— even hard-to-reach areas—for maximum flexibility and use
The LS100 does its job without disturbing residents, visitors, or business patrons.
You pay only for what needs to be cleaned: the LS100 sweeps an area extending 44 to 89 inches from the curb where more than 90% of street debris is found.
Anyone can operate the LS100: with its simple ergonomic controls and all-round visibility, it's safe to drive in crowded area and doesn't require a Class A licence.
Swept dirt stays where it belongs in the LS100 container thanks to 8-micron dust filtration, leaving behind clean and healthy air.
Clean cities are crucial to healthy people and healthy economies

People work, play, walk, run, and live in the city. They use streets, footpaths, parks, squares, and car parks—and they want them to be clean and safe.

Street sweepers help keep storm drainage systems clear, improving stormwater runoff quality. Sweeping also improves air quality, removing fine dirt, sand, and ultrafine particulates from cracks and crevices in the pavement.

Debris on the road can pose a hazard in other ways, too, from nails that can cause flat tires to rocks that become dangerous projectiles when thrown by a car tire. It's better having street sweepers to clean before an accident happens.

Living in a clean environment is more than just a matter of aesthetics. It's about appreciating the city as a pleasant place to get out and enjoy a breath of fresh air—a place that encourages a healthy lifestyle for the whole family.

Urban economies rely on corporate investment, dynamic local businesses and stores, and visitor appeal. Clean cities have a clear advantage in this respect.

A clean city will attract investors, multinational branch operations, even head offices. Because dirt is not a corporate value, clean cities are places investors look for to develop their business.

Local businesses and stores focus on serving their customers, but a dirty environment is not exactly a customer incentive. One after another, stores and businesses will leave a dirty town.

Garbage is also a real turnoff for tourists and for visitors attending meetings or conferences. A bad experience is bad for repeat business—and a surefire way to drive tourists and business travelers away.

Having a compact street sweeper designed to handle every kind of paving surface in every corner of the city is surely a good investment.

PS300 Pedestrian Vacuum Litter Sweeper

Madvac® PS300 Pedestrian Vacuum Litter Sweeper

View Specifications

People-friendly sweeper for areas with high pedestrian traffic

Sweeps, vacuums and sanitizes surfaces
Keeps operator and passerby dust-free; zero dust emissions
Wander hose for hard-to-reach places
Easy access for routine maintenance

LS175

The new Madvac® LS175 is specifically designed to address today’s urban cleaning challenges.

• Sweep litter on narrow, hard to reach areas that have various obstacles and different surface types:

Area: Sidewalks, bike and pedestrian lanes, parking lots, curb side, alleys, public markets, alongside buildings, pathways etc.

Obstacles : Bus shelters, lamp posts, benches, fire hydrants etc.

Paving type : Asphalt, concrete, cobblestone, brick

Madvac is the ultimate sweep / vacuum / wash mobile cleaning unit for:

VacAll

AllSweep

Vacall's AllSweep Street and Runway Sweepers Also Designed For Catch Basin Cleaning and Leaf Collection

View Specifications

Vacall™ Dynamic Multi-Purpose Vacuum Street Sweepers are set apart from routine street sweepers by high versatility, high performance and high value. AllSweep models are exceptionally versatile, handling the work of many machines to clean out catch basins as well as parking venues and runways.

An independent analysis by a certified test lab shows Vacall AllSweep models can deliver a maximum air flow of 31,000 CFM — the best in the industry.

Features and Benefits:

Patent-pending design
Single or dual system creates a sweep area that's wider than the width of the vehicle
Widest sweep path anywhere
One engine powers chassis and cleaner functions, cutting emissions and fuel consumption.
AllSmartFlow intelligent CAN bus control system improves operating efficiency.
Optional catch basin cleaner assembly stows out of the way against tailgate.
Reinforced steel debris tanks withstand bricks, rocks and asphalt millings.
Optional stainless steel debris tanks carry a lifetime warranty.
Tailgate opens, closes and locks hydraulically for fast debris dumping.
New hydrostatic drive system provides constant vacuum, water spraying and variable drive speeds while maintaining a lower constant engine speed.
Large water system requires less frequent re-filling and delivers longer run times.
Control valve compartment provides protection from weather and threat of damage.
New silencer designed for quieter operation.
Hydraulic system is conveniently located for ground-level service.

Refuse

Curbtender Refuse

Quantum

The Quantum is the US Waste Industry’s #1 selling small rear loader. It’s unique packing mechanism utilizes a patented “swing panel” instead of a “slide panel.” This key design change allows the packer to clear more trash in a shorter amount of time and with a smaller hopper requirement. The net result is a faster, lighter rear loader with industry leading legal payload. It’s hopper is also wide enough to receive commercial rear load containers without the use of a “flared hopper” modification. Lastly, the Quantum is rated for high compaction, making it a mighty little packer!

Standard Features

High strength chiseled body walls
Patented packing mechanism
Rear fenders
Curved floor that provides liquid sump
Low body height
Easy to Maintain

Optional Features

Container roll bar with Lip-and-Latch
Container Lip-and-Latch with 4,000 lb. drum winch
Container roll bar with Lip-and-Latch and Winch
Single or dual cart tipper
Cart tipper tap-in-kits
Strobe & Work lights
Broom and shovel holder
Rear view color camera system

Quantum MD

The new “MD” model is sold in 11YD and 13YD body configurations with a larger hopper than its smaller siblings.

The Quantum MD features Curbtender’s unique packing mechanism which features a patented “swing panel” instead of a “slide panel.” This key design change allows the packer to clear more trash in a shorter amount of time and with a smaller hopper requirement. The net result is a faster, lighter rear loader with industry leading legal payload. It’s hopper is also wide enough to receive commercial rear load containers without the use of a “flared hopper” modification. Lastly, the Quantum is rated for high compaction, making it a mighty little packer!

Standard Features

High strength chiseled body walls
Patented packing mechanism
Rear fenders
Curved floor that provides liquid sump
Low body height
Easy to Maintain

Optional Features

Container roll bar with Lip-and-Latch
Container Lip-and-Latch with 4,000 lb. drum winch
Container roll bar with Lip-and-Latch and Winch
Single or dual cart tipper
Cart tipper tap-in-kits
Strobe & Work lights
Broom and shovel holder
Rear view color camera system

Quantum XL

For years, the Quantum has been the industry’s leading small-body rear loader. The Quantum features a unique lightweight design, industry best cycle time, and high compaction rating. Now that same great performance is available in 16 cubic yard and 20 cubic yard body variants with the Quantum XL.

Efficient Operation

Thanks to its unique packing mechanism, the Quantum XL is able clear the hopper in only 15 to 18 seconds. That is up to 13 seconds faster than the industry standard. While 13 seconds may seem small, it adds up quickly over the course of a day, week, month, and year. Having a more efficient packer means you spend less per account on equipment costs, wages, and fuel burn.

More Legal Payload

The Quantum XL’s super-fast speed eliminates the need for the traditionally inefficient and heavy tailgate designs found in the industry. Instead, Curbtender Inc uses a 2.5 cubic yard hopper that is capable of processing 9.5 cubic yards of material per minute.

Increased efficiency directly translates to a reduction in body weight. The 20 YD Quantum XL weighs in at only 10,650 lbs. The Quantum XL’s lightweight design combined with up to 900 pounds per cubic yard compaction provides industry leading legal payload capacity.

Fury

The Fury is the ideal rear loader for mixed residential and commercial trash collection. It’s unique split tailgate feature allows the top portion of the tailgate to be unbolted and hydraulically lifted, allowing for unrivaled ease in servicing the packing panel.

Standard Features

Curved, chiseled body side wall
Split Tailgate
Auto back-pack
Engine accelerator
30X34” Access door (street-side)
Backup alarm
Driver alert buzzer (curbside)
LED S/T/T and Work Lights
12 Month Body 24 Month Cylinder Warranty

Optional Features

12,000 lb. Reeving winch
8,000 lb. Overhead Drum winch
Hydraulically operated roll bar
Single or dual cart tippers
Rear camera system (5” color LCD)

Phoenix

The Phoenix is a brute of a rear loader, designed to take the serious beatings of commercial waste collection- including demolition. While it looks similar to the Fury the Phoenix is chocked full of upgraded steel, heavy duty gussets, and structural enhancements. It also features Curbtender’s unique split tailgate feature which allows the top portion of the tailgate to be unbolted and hydraulically lifted, allowing for unrivaled ease in servicing the packing panel.

Standard Features

Curved, chiseled body side wall
Auto back-pack
Engine accelerator
Access door street side
Back-up alarm
Driver alert buzzer (curbside)
LED Work lights
LED ANSI/DOT Lights
12 month Body/ 24 month Cylinder warranty

Optional Features

12,000 lb Reeving Winch
8,000 lb Overhead Drum Winch
Hydraulically operated roll bar
Single or dual cart-tippers
Rear camera system (5” color LCD)
Arlock Container Device (Ultimate in Container Safety)

Titan

The Titan, made by Curbtender Inc., is a high compaction heavy duty front loader. It comes standard with 8,000 lb single piece bolt-on arms with 4.5″ hydraulic cylinders. As an option, the Titan can be equipped with Curbtender’s patented 3 Piece Lift Arm. This robust option adds strength but also improves ease of maintenance. If an arm becomes damaged and needs repair, one individual section can be quickly and easily replaced. All three sections of the arm can ship together on one pallet, resulting in a dramatic freight savings.

Cardboard Special

Haulers on cardboard or recycling routes have always struggled to maximize payload. Thanks to the Titan’s optional “cardboard package,” haulers experience a dramatic increase in total payload. Curbtender installs high performance hydraulic cylinders and other proprietary tweaks to the system to help condense cardboard material more efficiently. The result becomes vividly clear the first time you eject a “cardboard loaf” at the transfer station.

In Control

The Titan’s optional electronic controls package allows for incredibly easy operation. Just pull back the joystick and let the Titan automatically dump the container and then set it back down exactly in the spot you picked it up at. Service becomes even easier with the on-board diagnostics screen that displays every input and output of the electronic control system, and whether or not it is sending/receiving a signal.

Titanium

The Titanium is a revolutionary new front loader design, developed for the ultimate in versatility. The base model comes equipped with patented articulated lift arms, allowing it to be mounted on a conventional truck chassis if desired.

Affordability by Design

Curbtender’s patented articulated arms allow the Titanium to be mounted on a Freightliner M2106 conventional chassis, which can cost up to $40,000 less than a cab-over-engine truck chassis. Still want a COE? The Titanium has optional single piece welded arms which allow it to be mounted on a cab-over when needed.

Light on Weight, Heavy on Tough

Designed using the concepts of a rear load body, the Titanium inherently has a durable high compaction body yet weighs less than the traditional front load body design. When mounted on an M2 chassis, the patented articulated lift arms are rated at 6,000 lbs. Meanwhile, the Titanium’s single piece lift arms used for COE configurations are rated at 8,000 lbs.

TomKat

The TomCat is Curbtender’s most versatile refuse collection truck. This truck was made to be custom tailored for your operation with options like single or dual stream collection, 6-18 cubic yard body, full ejection or satellite waste transfer (into a rear loader), and multiple lifting attachments. Curbtender doesn’t sacrifice on quality or features just because the TomCat is considered a “little truck.” Instead, we’ve created the most durable packer in its product class with a single piece formed Hardox floor and monster hopper clean-out doors.

Standard Features

Chiseled shell design
Ultra-high strength-to-weight ratio
Low loading height
Loads from both sides
Simultaneous load-and-pack
14-16 second packing cycle time
Standard 8” side doors
No-fall back design Full eject method

Optional Features

6 – 18 Cubic Yard Body Sizes
Taller Hopper Side Doors
Satellite Ejection (Tilt-to-Transfer in Rear Loader)
Split Body Configurations
Cart Tippers Mounted on Both Sides
Multiple Cart Tipper Types

Pup

The pup is the ideal packer for parks and rec departments, beaches and resorts, campuses, zoos, mobile home courts, and other limited access locations. The easy access side doors allow loading of bags, cans, and boxes without the aid of equipment. Optional barrel or cart dumpers add versatility for collecting residential trash containers.

The Pup can be truck mounted or trailer mounted, further adding to valuable flexibility.

Standard Features

Upper & lower hopper
Manual controls on both sides of body
Manual Tailgate
Safety interlocks
Packs a ton – fits on one-ton trucks
Loads from both sides
Totally enclosed hopper – keeps trash contained
Full-eject unloading, no body tipping
Truck-mounted or trailer mounted models

Optional Features

Barrel Dumper – right or left side
Cart Tipper – right or left side
European Cart Tipper – right or left side
Strobe and Work Lights
Hydraulic tailgate with auto lock

PowerPak

In 1978 the Curbtender was introduced as the Waste industry’s first commercially produced automated side loader and has maintained its status as the industry standard bearer ever since. Now called the PowerPak, the ASL features 1,000 pounds per cubic yard compaction and the legendary 2,000 pound rated “PowerArm” lifting device. A 5-Year arm structural warranty comes standard on the PowerArm and is unrivaled by any competitor.

The PowerPak continues to be on the forefront of automated waste collection thanks to reliable electronics and efficient hydraulic controls.

Air Over Hydraulic PLC

Simple yet robust, the PowerPak is available with an air-over-hydraulic system with a programmable logic controller. This 3^rd generation PLC features a rugged mobile controller that can handle the severe shock and vibrations that refuse trucks experience. Many of our competitors instead use a delicate printed circuit board designed for industrial PLC systems.

Electronic Proportional Controls

Our electronic proportional controls option (EPC) is by far the most popular control system ordered by our customers. This feature-rich system allows smoother arm operation, driver customization, and on-board diagnostics. Taking a step into the digital age doesn’t require sacrificing reliability either. The PowerPak’s EPC system features a standard 5-Year warranty on operational controls.

Designed for Your Route

The PowerPak’s body features a 1,000 lbs per cubic yard compaction rating and a standard 5-year body structural warranty. Choose Full Ejection or Tip-to-Dump style according to your preference. A flat tailgate or bubble tailgate can be installed to create the ideal weight distribution for your region. Optional steel “wear liners” and heavy duty follower panels are available for seriously heavy-duty routes. From the ground up, the PowerPak is designed to be a high-performance machine tailored to your needs.

Autocat

Standard Features

10, 12, 14 and 18 yard capacity
6 foot arm reach
14-second arm cycle time
Lifts container close to truck
17-second packing cycle time
Dual-side clean-out doors
45 container dump angle
Ultra-high strength abrasion resistant steel 450 floor

Optional Features

Strobe Lights
Auto neutral arm control
Work lights
Rotating beacon

Hammerpak

PACKING A UNIQUE PUNCH

The HammerPak is named after its patented packing mechanism which features a hammer-like packing panel. The packing panel pivots forward and backward inside a curved hopper, much like the swing of a hammer. With this design, the packer makes a “clean sweep” with every stroke and eliminates the need for a hopper clean-out door. The HammerPak is rated for 700 pounds per cubic yard compaction.

Extending Your Capability

A 12′ reach arm, called the Xtender, comes standard on the HammerPak automated side loader. This simple arm is one of the most robust extended reach arms available on the market. Some arms made by our competitors require major overhauls annually. Whereas, the Xtender arm provides more operating time before service is needed. Need even more durability? Curbtender’s famous “Power Arm” is available on the HammerPak with a lift capacity limited to 850 pounds and a 5 year structural warranty.

Designed for a Lower Cost of Ownership

The HammerPak is an inherently simple automated side loader designed with fewer moving parts and less hydraulic components. The packing mechanism is actuated by a single roof-mounted hydraulic cylinder. Using a roof-mounted pack cylinder keeps the rod and seal out of the trash zone and thereby extends its expected life. The tailgate is opened using a single, roof-mounted cylinder. This robust cylinder replaces the two body side mounted cylinders normally used to open a tailgate. One multi-stage cylinder is mounted in front of the hopper to lift the body and eject the load, similar to a dump truck. In total, the HammerPak has nearly 25% less hydraulic components than a standard automated side loader.

Ledwell

Ledwell Grapple Loader

2021 Freightliner, Model M2 106

Cummins L9, 300 H.P. Engine

Allison 3000 RDS Automatic Transmission

Front Axle: 18,000# / Rear Axle: 40,000#

W/B-252", Set Back Axle Package

GVWR: 58000#

20’ x 101.5” x 47” x 59” – 19/24 Yards
8” x 11.5# Structural channel longitudinal members
4” I-beams, crossmembers on 12” centers
3/16” steel body
7 Gauge steel formed sides – ¼” Steel floor
8” Asphalt lip
Heavy duty front and rear corner pillars
In-cab shift tower
35-ton capacity – Telescopic Hoist cylinder
Heavy duty double acting tail gate with spreader chains & reinforced keyhole slots.
Air-operated mechanical tailgate
Grapple storage reinforcement in tailgate
Non-adjustable pintle hitch – 45 ton capacity.
Air/Electric brake with glad hands
7-way round + RV assembly
Hydraulic wet kit with hot shift PTO
¾” LED marker lights
Body-up indicator light
Painted black
Rotobec Elite 910 Loader with MT22 Boom
- 8,800 LBS Max lift capacity
- 5,090 LBS @ 20 FT. lift capacity
- 22’ Boom length W/360 degree rotation
- “A” Stabilizer with anchor kit
- 040W with RT-22 Grapple

Leaf Vacuum

Curbtender Leaf

VacPak

A garbage truck and a leaf collector converge to create a multi-purpose collection vehicle that every municipality can use. The VacPak is a refuse truck specifically designed for organics collection, food waste collection, yard waste collection, and rural or small-route refuse collection. The vacuum package is a bolt-on attachment that can be added or removed for seasonal collection of leaves.

Leaf Collection, With a Punch

Unlike traditional leaf collection machines, the VacPak is able to maximize the amount of leaves collected thanks to its packing mechanism. For most of the year this packing mechanism can be used to maximize trash payload. But during the fall months, its packing force helps to push the leaves into a condensed load as the vacuum pulls more leaves into the body.

Free to Wander

The VacPak’s vacuum hose boom articulates side-to-side with the use of a joystick, allowing the user to direct suction towards piles of leaves without the use of an assistant. The boom is controlled by the same rugged rotary hydraulic cylinder that Curbtender uses on its street sweeper gutter brooms.

Ready to Haul

The VacPak is a versatile manual side loading refuse truck. The body structure and compactor design is derived from the well-known TomCat side loader series manufactured by Curbtender Inc and Wayne Engineering for several decades. During the off season, the VacPak is designed to collect waste from either side and can be equipped with a variety of cart tippers or barrel lifters. The VacPak’s lightweight 18 cubic yard body has sidewalls made entirely of abrasion resistant metal to ensure years of productive service. Loads are ejected using a “full ejection” method rather than “tip-to-dump.”